|
FortiAP-231E |
FortiAP-321E |
Indoor/Outdoor Deployment |
Indoor AP |
Indoor AP |
Number of Radios |
3 + 1 BLE |
2 + 1 BLE |
Number of Antennas |
6 Internal + 1 BLE internal |
6 Internal (RP-SMA) + 1 BLE internal |
Antenna Type and peak Gain |
PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
PIFA: 3 dBi for 2.4 GHz, 4 dBi for 5 GHz |
Frequency Bands (GHz)* |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz or 5.0 GHz (high band) a/b/g/n/ac W2 (2x2:2 stream) 20/40/80 MHz |
2.4 GHz b/g/n (3x3:3 stream) 20/40 MHz |
Radio 2 Capabilities |
5.0 GHz a/n/ac W2 (2x2:2 stream) 20/40/80 MHz |
5 GHz a/n/ac (2x2:2 stream) 20/40/80 MHz |
Radio 3 Capabilities |
2.4/5.0 GHz dual band b/g/n (2x2:2 stream) 20/40 MHz |
- |
Maximum Data Rate |
Radio 1: up to 867 Mbps
Radio 2: up to 867 Mbps
Radio 3: up to 400 Mbps |
Radio 1: up to 450 Mbps
Radio 2: up to 1,300 Mbps |
Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power |
Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power |
Interfaces |
2x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 |
1x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
IEEE 802.3af or 802.3.at |
IEEE 802.3af & 802.3at |
Simultaneous SSIDs |
Up to 24 (21 if background scanning enabled) |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
2.4 GHz: 24 dBm / 251 mW (2 chains combined)
5 GHz: 25 dBm / 316 mW (2 chains combined) |
2.4 GHz: 27.7 dBm/588 mW (3 chains combined)
5 GHz: 27.7 dBm / 588 mW (3 chains combined) |
Kensington Lock |
Yes |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at |
SSID Types Supported |
Local-Bridge, Mesh, & Tunnel |
Local-Bridge, Mesh, & Tunnel |
Per Radio Client Capacity |
Up to 512 for Radio 1 & 2, Up to 128 for Radio 3 |
Up to 128 for Radio 1, Up to 512 for Radio 2 |
Cellular Co-existence |
Yes |
Yes |
LED Off Mode |
Yes |
Yes |
802.11ac Wave 2 MU-MIMO |
Yes |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
Yes |
A-MPDU and A-MSDU Packet Aggregation |
Yes |
Yes |
MIMO Power Save |
Yes |
Yes |
Short Guard Interval |
Yes |
Yes |
OFDMA |
No |
No |
Rogue Scan Radio Modes |
Background, Dedicated |
Background, Dedicated |
WIPS / WIDS Radio Modes |
Background, Dedicated |
Background, Dedicated |
Packet Sniffer Mode |
Yes |
Yes |
Spectrum Analyzer |
Yes |
Yes |
Length x Width x Height |
7.87 x 7.87 x 1.81 inches (200 x 200 x 46 mm) |
7.08 x 7.08 x 1.50 inches (180 x 180 x 38 mm) |
Weight |
1.2 lbs (0.55 kg) |
1.0 lbs (0.454 kg) |
Package (shipping) Weight |
2.5 lbs (1.15 kg) |
1.60 lbs (0.73 kg) |
Mounting Options |
Ceiling, T-Rail and Wall |
Ceiling, T-Rail and Wall |
Included Accessories |
Mount kits for Ceiling, T-Rail, and Wall |
Mount kits for Ceiling, T-Rail, and Wall |
Power Supply |
SP-FAP200-PA-XX, GPI-130 |
SP-FAP200-PA-XX, or GPI-130 |
Power Consumption (Max.) |
17 W with 802.3at PoE,12.9 W with 802.3af PoE- reduced TX power (13dBm per radio) |
1.68 W |
Humidity |
5–93% non-condensing |
10–90% non-condensing |
Operating Temperature |
32–104°F (0–40°C) / -31–158°F (-35–70°C) |
14–113°F (-10–45°C) / -22–158°F (-30–70°C) |
Directives |
Low Voltage Directive • RoHS |
Low Voltage Directive • RoHS |
UL2043 Plenum Material |
Yes |
Yes |
Mean Time Between Failures |
>10 Years |
>10 Years |
IP Rating |
N/A |
N/A |
Surge Protection Built In |
— |
— |
Hit-less PoE Failover |
No |
No |
WiFi Alliance Certified |
No |
No |
DFS |
FCC, IC, CE |
FCC, CE |
Limited Lifetime Warranty |
Yes |
Yes |
* Frequency selection and power may be restricted to abide by regional regulatory compliance laws.